use smart_leds_trait::SmartLedsWrite;

use crate::lib8::Rgb8Blend;
use crate::render::{Surface, SurfacePool, Display, Surfaces};
use crate::power::{brightness_for_mw, AsMilliwatts};
use crate::geometry::*;
use std::fmt::{Debug, Formatter};

use smart_leds::brightness;

use std::io;

use rgb::Rgb;

pub struct SmartLedDisplay<T: SmartLedsWrite<Color = Rgb<u8>>, S: Surface, const PIXEL_NUM: usize> {
    surfaces : SurfacePool<S>,
    target: T,
    pixbuf: [T::Color; PIXEL_NUM],
    max_mw: u32
}

impl<T: SmartLedsWrite<Color = Rgb<u8>>, S: Surface, const PIXEL_NUM: usize> Debug for SmartLedDisplay<T, S, PIXEL_NUM> {
    fn fmt(&self, f: &mut Formatter) -> Result<(), std::fmt::Error> {
        f.debug_struct("SmartLedDisplay")
            .field("total_mw", &self.pixbuf.as_milliwatts())
            .field("surfaces", &self.surfaces)
            .finish()
    }
}

impl<T: SmartLedsWrite<Color = Rgb<u8>>, S: Surface, const PIXEL_NUM: usize> SmartLedDisplay<T, S, PIXEL_NUM> {
    pub fn new(target: T, max_mw: u32) -> Self {
        SmartLedDisplay {
            surfaces: SurfacePool::new(),
            pixbuf: [Rgb::new(0, 0, 0); PIXEL_NUM],
            target: target,
            max_mw: max_mw,
        }
    }
}

impl<T: SmartLedsWrite<Color = Rgb<u8>>, S: Surface, const PIXEL_NUM: usize> AsMilliwatts for SmartLedDisplay<T, S, PIXEL_NUM> {
    fn as_milliwatts(&self) -> u32 {
        self.pixbuf.as_milliwatts()
    }
}

impl<T, S, const PIXEL_NUM: usize> Surfaces<S> for SmartLedDisplay<T, S, PIXEL_NUM>
where
T: SmartLedsWrite<Color = Rgb<u8>>,
S: Surface {
    fn new_surface(&mut self) -> Result<S, io::Error> {
        self.surfaces.new_surface()
    }
}

impl<T: SmartLedsWrite<Color = Rgb<u8>>, S: Surface, const PIXEL_NUM: usize> Display<S> for SmartLedDisplay<T, S, PIXEL_NUM> {

    fn start_frame(&mut self) {
        self.pixbuf.fill(Rgb::new(0, 0, 0));
    }

    fn end_frame(&mut self) {
        let b = brightness_for_mw(self.pixbuf.as_milliwatts(), 255, self.max_mw);
        let _ = self.target.write(brightness(self.pixbuf.iter().cloned(), b));
    }

    fn render_frame(&mut self) {
        for x in 0..self.pixbuf.len() {
            let virt_coords = VirtualCoordinates::new(x as u8, 0);
            let mut pixel = Rgb::new(0, 0, 0);
            for surface in self.surfaces.iter() {
                surface.with_shader(|shader| {
                    pixel = pixel.saturating_add(shader.draw(&virt_coords));
                })
            }
            self.pixbuf[x] = Rgb::new(pixel.r, pixel.g, pixel.b);
        };
    }
}

#[cfg(feature="rmt")]
pub mod rmt {
    use esp_idf_svc::hal::prelude::Peripherals;
    use ws2812_esp32_rmt_driver::lib_smart_leds::Ws2812Esp32Rmt;

    use crate::render::{Display, Surface};
    use crate::platform::smart_leds_lib::SmartLedDisplay;

    use crate::platform::DisplayInit;
    impl DisplayInit for Ws2812Esp32Rmt<'_> {
        fn new_display<S: Surface>() -> impl Display<S> {
            let peripherals = Peripherals::take().unwrap();
            let led_pin = peripherals.pins.gpio14;
            let channel = peripherals.rmt.channel0;

            const POWER_VOLTS : u32 = 5;
            const POWER_MA : u32 = 500;
            const MAX_POWER_MW : u32 = POWER_VOLTS * POWER_MA;

            let target = Self::new(channel, led_pin).unwrap();
            return SmartLedDisplay::<Ws2812Esp32Rmt, S, 300>::new(target, MAX_POWER_MW);
        }
    }
}

#[cfg(feature="spi")]
pub mod spi {
    use ws2812_spi::Ws2812;

    use crate::render::{Display, Surface};
    use crate::task::Task;
    use crate::platform::smart_leds_lib::SmartLedDisplay;
    use crate::DisplayInit;

    use esp_idf_svc::hal::{
        prelude::*,
        gpio::AnyIOPin,
        spi::{
            config::{Config, DriverConfig},
            Dma,
            SpiBusDriver,
            SpiDriver,
        }
    };

    pub struct SPIDisplay {}
    impl DisplayInit for SPIDisplay {
        fn new_display<S: Surface>() -> impl Display<S> + Task {
            let peripherals = Peripherals::take().unwrap();

            let driver = SpiDriver::new_without_sclk(
                peripherals.spi2,
                peripherals.pins.gpio14,
                Option::<AnyIOPin>::None,
                &DriverConfig::new().dma(Dma::Auto(512))
            ).unwrap();

            let cfg = Config::new().baudrate(3_200.kHz().into());

            let spi = SpiBusDriver::new(driver, &cfg).unwrap();

            const POWER_VOLTS : u32 = 5;
            const POWER_MA : u32 = 500;
            const MAX_POWER_MW : u32 = POWER_VOLTS * POWER_MA;
            let target = Ws2812::new(spi);
            return SmartLedDisplay::new(target, MAX_POWER_MW)
        }
    }
}